Used models
CAT / Caterpillar / Excavator
USED MACHINERY / EXCAVATOR
Planning to use it for earthmoving and foundation work? Start with the equipment photos, reference specifications and FOB price, then tell us your configuration requirements, budget and destination port.
Representative model · Supplied on request Photos and specifications are for model comparison only; confirm the specific unit, configuration and availability when you request a quotation.
01 / TECHNICAL SPECIFICATIONS
The following preserves the fields, values and units as shown in the technical data; no estimates are made. Different configurations, optional equipment and production batches may vary; the specific purchase is governed by the nameplate, configuration list and the contract’s technical annexes.
Inquire matching configuration ↗| SpecificationsParameter | Value |
|---|---|
| ModelModel | CAT 349D |
| BrandBrand | Caterpillar |
| Engine modelEngine Model | CAT C13 ACERT |
| Net powerNet Power | Approx. 283–290 kW (380–390 HP) |
| Operating weightOperating Weight | 47,000 – 50,000 kg |
| Bucket capacityBucket Capacity | 2.0 – 3.2 m³ (varies by configuration) |
| Maximum digging depthMax Digging Depth | ~7,400 mm |
| Maximum digging reachMax Digging Reach | ~11,500 mm |
| Maximum discharge heightMax Dumping Height | ~7,500 mm |
| Swing speedSwing Speed | ~8.5 rpm |
| Travel speedTravel Speed | 3.0 / 5.0 km/h |
| Hydraulic flowHydraulic Flow | ~2 × 360–380 L/min |
| Hydraulic pressureHydraulic Pressure | ~35 MPa |
| Fuel tank capacityFuel Tank Capacity | ~720 L |
| Hydraulic oil capacityHydraulic Oil Capacity | ~350 L |
| Chassis widthUndercarriage Width | ~3,500 mm |
| Applicable working conditionsApplications | Mining, quarrying, earthmoving, heavy construction |
02 / PRODUCT DETAILS
From operating use to key components, learn about the equipment with images and parameters.
Request a quote for this model ↗Excavator selection can start by comparing photos, power and operating parameters against your site conditions. This page describes the model’s features; once you confirm a specific machine, verify the nameplate, operating hours, key components and operation video.
The CAT 349D is a high-performance 50-ton heavy excavator, widely used in mining, large earthmoving, quarrying and major construction projects. Powered by the proven Caterpillar C13 ACERT engine and a robust hydraulic system, the 349D delivers superior digging force, high lifting capacity and outstanding productivity in severe environments.
Built with a durable undercarriage, reinforced boom and stick, and reliable hydraulic components, the CAT 349D is engineered for long-term performance, reduced operating costs and high fuel efficiency.
50-ton heavy excavator with strong digging capability
Powerful Caterpillar C13 ACERT engine
High lifting capacity suitable for mining and quarrying
Advanced hydraulic system—stable and responsive
Reinforced structure for extended service life
Suitable for mining, construction and large earthmoving projects
Low fuel consumption and reduced maintenance costs


MODEL NOTES
The CAT 349D is a heavy excavator in the 47–50 ton class, commonly used in quarries, mine stripping and large-volume earthworks. The four points below, based on the specs on this page, help you decide if it fits your project and what to check during inspection.
The 349D uses buckets of 2.0–3.2 m³, considerably larger than the CAT 336’s 1.6–2.2 m³, so it’s better for loading large-capacity dump trucks, digging hard ground and handling blasted rock. If your work is mainly ordinary earthworks, trenches and municipal projects, a 36 t machine has lower fuel, transport and mobilization costs. According to the site data, the 336’s maximum digging depth is 8,210 mm, deeper than the 349D’s about 7,400 mm.
For the C13 ACERT engine, check cold starts, smoke color and crankcase blow-by, and verify actual hours against maintenance records. Hydraulic data show dual pumps of about 2 × 360–380 L/min at about 35 MPa. In the operation video, confirm the machine lifts a full bucket, swings and travels together with power, and that the boom does not noticeably drift down when the engine is off.
On a 50 ton excavator, replacing track links, carrier rollers, drive sprockets or the swing bearing is costly. Request close-up photos of the tracks from all four sides and photos of boom and stick welds; inspect for cracks, weld repairs and excessive pin wear.
Whole machine about 47–50 t, chassis width about 3,500 mm — does not fit a standard container. Common practice is to remove the bucket and other parts and ship on a flat rack, or by ro-ro or general cargo vessel. Costs and destination-port requirements vary greatly by method. When requesting a quote, tell us the destination port and we will propose a transport plan based on the actual dimensions.
03 / MATCH & VERIFY
After you enquire about a specific machine, verify the documents and delivery conditions in the following order.
Request current photos of the matched equipment, its location and the nameplate/serial number, and confirm which machine the final quotation applies to.
Base your assessment on actual records and on-site inspection; pay special attention to key parts such as the engine, hydraulic system and undercarriage.
Request a current operation video; the location, date and costs of an on-site or third-party inspection will be agreed separately.
Verify the machine's actual identity, condition description, mode of transport and both parties' responsibilities; also confirm the payment information.