Used models
CAT / Caterpillar / Excavator
USED MACHINERY / EXCAVATOR
Planning to use it for earthmoving and foundation work? Start with the equipment photos, reference specifications and FOB price, then tell us your configuration requirements, budget and destination port.
Representative model · Supplied on request Photos and specifications are for model comparison only; confirm the specific unit, configuration and availability when you request a quotation.
01 / TECHNICAL SPECIFICATIONS
The following preserves the fields, values and units as shown in the technical data; no estimates are made. Different configurations, optional equipment and production batches may vary; the specific purchase is governed by the nameplate, configuration list and the contract’s technical annexes.
Inquire matching configuration ↗| SpecificationsParameter | Value |
|---|---|
| ModelModel | CAT 336 (2024) |
| BrandBrand | Caterpillar |
| Engine modelEngine Model | CAT C7.1 |
| Net powerNet Power | 300 HP / 223.5 kW |
| Operating weightOperating Weight | 36,500 – 36,800 kg |
| Bucket capacityBucket Capacity | 1.6 – 2.2 m³ (varies by configuration) |
| Maximum digging depthMax Digging Depth | 8,210 mm |
| Maximum ground working reachMax Reach at Ground Level | 11,760 mm |
| Maximum discharge heightMax Dumping Height | 7,040 mm |
| Swing speedSwing Speed | 8.4 rpm |
| Travel speedTravel Speed | 3.5 / 5.5 km/h |
| Hydraulic pump flowHydraulic Pump Flow | 560 L/min |
| Hydraulic pressureHydraulic Pressure | 35 MPa |
| Fuel tank capacityFuel Tank Capacity | 474 L |
| Hydraulic oil tank capacityHydraulic Tank Capacity | 234 L |
| Urea tank (AdBlue)DEF Tank (AdBlue) | 38 L |
| Boom lengthBoom Length | 6.15 m |
| Bucket arm lengthStick Length | 3.2 m |
| Chassis widthUndercarriage Width | 3,280 mm |
| Applicable working conditionsApplications | Heavy construction, mining support, quarry work, earthmoving |
02 / PRODUCT DETAILS
From operating use to key components, learn about the equipment with images and parameters.
Request a quote for this model ↗Excavator selection can start by comparing photos, power and operating parameters against your site conditions. This page describes the model’s features; once you confirm a specific machine, verify the nameplate, operating hours, key components and operation video.
The 2024 CAT 336 is a next‑generation 36‑ton excavator designed for high productivity, maximum fuel efficiency and long‑term durability. Equipped with the advanced CAT C7.1 engine and a high‑performance hydraulic system, the 336 delivers strong digging power, smooth operation and significantly lower fuel consumption compared with earlier models.
With upgraded structures, intelligent controls and improved operator comfort, the 2024 CAT 336 is well suited for mining support, heavy construction, earthmoving, quarry work and large engineering projects.
2024 next‑generation 36‑ton excavator, equipped with advanced technology.
CAT C7.1 engine: high power and excellent fuel economy.
Fuel consumption reduced up to 15–20% compared with the previous CAT 336.
Powerful digging force and high heavy‑lift capacity.
Smart Mode, Grade Assist, Payload detection and advanced control systems.
Reinforced boom, arm and undercarriage for extended service life.
Lower maintenance costs and improved reliability.



MODEL NOTES
Data refer to a CAT 336 model 2024, 36 t, with Smart Mode, Grade Assist and Payload; suited to heavy earthmoving, rock loading and quarry work. The following four points help you compare it with neighboring models and check a used unit.
On this page the 336 is listed with 300 HP net power, 560 L/min hydraulic flow and a 1.6–2.2 m³ bucket; the CAT 330 is 202 HP, 2 × 268 L/min and 1.2–1.9 m³. For general earthwork and moderate loading volumes, the 330 is more fuel-efficient; for rock, hard ground and large-volume loading, the 336 is more appropriate. If you need a larger bucket, consider the 50 t CAT 349D.
This page lists the engine as CAT C7.1. According to Caterpillar’s published data, the new-generation 336 comes standard with the C9.3B, while the C7.1 is typically used on the 330. When you inspect the machine, photograph the engine nameplate and confirm the actual model before ordering filters, parts and maintenance intervals.
Whether features like Grade Assist or Payload are fitted and operational varies by each used unit. In the run video, have the operator open the display menu and demonstrate each function, confirm the interface can switch to Spanish or English, and verify the hours shown on the screen match the quoted hours.
The specs list a 38 L urea tank, indicating the machine has an exhaust aftertreatment system. These systems require low-sulfur diesel and quality DEF; high-sulfur diesel or inadequate DEF can trigger alarms and derate the engine. Before ordering, confirm fuel and DEF availability at your location. The machine is about 36.5 t with a track width of 3,280 mm and is commonly shipped on flat rack or ro-ro vessels.
03 / MATCH & VERIFY
After you enquire about a specific machine, verify the documents and delivery conditions in the following order.
Request current photos of the matched equipment, its location and the nameplate/serial number, and confirm which machine the final quotation applies to.
Base your assessment on actual records and on-site inspection; pay special attention to key parts such as the engine, hydraulic system and undercarriage.
Request a current operation video; the location, date and costs of an on-site or third-party inspection will be agreed separately.
Verify the machine's actual identity, condition description, mode of transport and both parties' responsibilities; also confirm the payment information.