Used models
XCMG / Wheel loader
USED MACHINERY / MOTOR GRADER
Planning to use it for road leveling? Start with the equipment photos, reference parameters and the FOB price; then tell us your desired configuration, budget and destination port.
Representative model · Supplied on request Photos and specifications are for model comparison only; confirm the specific unit, configuration and availability when you request a quotation.
01 / TECHNICAL SPECIFICATIONS
The following preserves the fields, values and units as shown in the technical data; no estimates are made. Different configurations, optional equipment and production batches may vary; the specific purchase is governed by the nameplate, configuration list and the contract’s technical annexes.
Inquire matching configuration ↗| ItemItem | Specification |
|---|---|
| ModelModel | XCMG GR1803 |
| Operating weightOperating Weight | ~15,400 – 16,000 kg |
| EngineEngine | Cummins 6BT / QSB |
| Rated powerRated Power | 132 kW / 180 HP |
| Push blade dimensionsBlade Size | 3965 × 610 mm (13 ft × 24 in) |
| Maximum blade lift heightMax Blade Lifting Height | ~450 mm |
| Maximum cutting depthMax Cutting Depth | ~500 mm |
| WheelbaseWheelbase | ~6,200 mm |
| Travel speedTravel Speed | 6–40 km/h (varies by gear) |
| Hydraulic systemHydraulic System | Load-sensing hydraulic system |
| Applicable working conditionsApplications | Road building, gravel roads, mining, agriculture, slope work, infrastructure |
02 / PRODUCT DETAILS
From operating use to key components, learn about the equipment with images and parameters.
Request a quote for this model ↗You can begin grader selection by comparing site photos, power and working parameters. This page describes the model’s features; after you choose a specific machine, verify the nameplate, operating hours, key components and the operation video.
The XCMG GR1803 motor grader is a high-performance road construction machine suitable for leveling, finishing, trenching, slope forming and road maintenance. Equipped with a powerful Cummins diesel engine, the GR1803 offers excellent traction, stable hydraulic control and reliable working performance in severe conditions.
Cummins engine – 180HP output, high reliability and fuel efficiency
Advanced hydraulic system – smooth blade control and precise grading performance
Robust frame structure – Suitable for heavy-duty roadworks and long-term operation
Comfortable cab – Wide visibility, ergonomic controls, and a safe, efficient working environment
Multifunctional operation – Leveling, trenching, slope forming, road maintenance, and snow removal
MODEL NOTES
The GR1803 is a 180 HP grader weighing about 15.4–16 t, with a 3,965 × 610 mm (13 ft) blade. It’s commonly used for gravel road maintenance, new-road leveling, slopes and mine-road upkeep. The four points below help you decide if it suits your needs and what to check during inspection.
This class is suitable for daily maintenance of municipal and rural roads, leveling and slope profiling on new roads, and upkeep of farm and mine access roads. Specs show a maximum cutting depth of about 500 mm and a travel speed of 6–40 km/h, allowing self-relocation between nearby sites.
Specs list Cummins 6BT / QSB. The 6BT uses a mechanical injection pump, is simple and can be serviced by ordinary diesel shops even in remote areas; the QSB is electronically controlled, with better fuel consumption and emissions, but requires a diagnostic scanner and higher diesel quality. Confirm the engine nameplate on the specific unit assigned.
On a motor grader, check wear and backlash of the teeth on the blade circle, the cutting edges, for leaks or noises in the rear tandem axle housings, and for play in the front axle and articulation pins. In the running video, request the blade to be raised and lowered, shifted, rotated and tilted in sequence, and observe that each movement is smooth.
The machine weighs about 15.4–16 t with a wheelbase of about 6,200 mm and will not fit in a standard container; it normally ships by Ro-Ro or in a flat rack. For road projects you can bundle it with a road roller and dump truck for a combined quotation and shipment.
03 / MATCH & VERIFY
After you enquire about a specific machine, verify the documents and delivery conditions in the following order.
Request current photos of the matched equipment, its location and the nameplate/serial number, and confirm which machine the final quotation applies to.
Base your assessment on actual records and on-site inspection; pay special attention to key parts such as the engine, hydraulic system and undercarriage.
Request a current operation video; the location, date and costs of an on-site or third-party inspection will be agreed separately.
Verify the machine's actual identity, condition description, mode of transport and both parties' responsibilities; also confirm the payment information.