Reference new model
YUYAN / Telehandler
NEW MACHINERY / TELEHANDLER
YUYAN brand new machinery · Manufactured in Hefei by YUYAN
For material lifting and handling: review photos and the spec sheet; then ask for a quotation based on configuration, quantity, and destination port.
Representative model · Supplied on request Photos and specifications are for model comparison only; confirm the specific unit, configuration and availability when you request a quotation.
01 / TECHNICAL SPECIFICATIONS
The following preserves the fields, values and units as shown in the technical data; no estimates are made. Different configurations, optional equipment and production batches may vary; the specific purchase is governed by the nameplate, configuration list and the contract’s technical annexes.
Inquire matching configuration ↗| Engine configurationEngine option | Cummins QSF3.8–C140 | Perkins 904J–E36TA |
|---|
| Overall length (bucket on ground)Overall length (bucket on ground) | 7700±50 mm | |
|---|---|---|
| Overall length (forks on ground)Overall length (forks on ground) | 7500±50 mm | |
| Overall machine length (without forks or bucket)Overall length (without forks or bucket) | 6330±50 mm | |
| Overall width (tire outer edge / hood outer edge)Overall width (outer tire edges, outer hood edges) | 2420±50 mm | |
| Overall width (hydraulic outriggers fully deployed)Overall width (hydraulic stabilizers fully extended) | 3800±50 mm | |
| Overall height (to top of cab)Overall height (to top of cab) | 2815±20 mm | |
| WheelbaseWheelbase | 3300±10 mm | |
| Wheel trackTrack width | 1980±10 mm | |
| Rated loadRated load | 4000 kg | |
|---|---|---|
| Operating weightOperating weight | 13000 kg | |
| Maximum lifting heightMaximum lift height | 17500±50 mm | |
| Maximum front reachMaximum forward reach | 13000±50 mm | |
| Lifting time (unloaded/loaded)Lift time (unladen / fully laden) | 13.9 s/18.9 s | |
|---|---|---|
| Lowering timeLowering time | 19.5 s | |
| Extension timeBoom extension time | 21.2 s | |
| Boom retraction timeBoom retraction time | 20 s | |
| Tilt-back timeTilt-back time | 7.2 s | |
| Tilt-forward timeForward tilt time | 7.2 s | |
| Engine modelEngine model | Cummins QSF3.8–C140 (Stage III) | Perkins 904J–E36TA (Euro V) |
|---|---|---|
| Cooling systemCooling type | Liquid cooling | |
| Rated powerRated power | 104 kW | 100 kW |
| Total displacementTotal displacement | 3.8 L | 3.62 L |
| Rated speedRated speed | 2200 r/min | |
| Maximum torqueMaximum torque | 540 N·m | 550 N·m |
| Cooling systemCooling type | Pressure-pulsation hydraulic circuit | |
|---|---|---|
| ModelModel | CA587914S | |
| TypeType | Hydrostatic transmission | |
| Front axle modelFront axle model | CA599663S | |
|---|---|---|
| Rear axle modelRear axle model | CA599664S | |
| Number of gearsNumber of gears | 2 forward gears, 2 reverse gears (2F/2R) | |
|---|---|---|
| Travel speed (forward/reverse) (km/h)Travel speed (F/R) (km/h) | F1:11 km/h;F2:30 km/h;R1:11 km/h;R2:30 km/h | |
| Service brakeService brakes | Hydraulic oil‑immersed multi‑plate brake (wet brake) | |
| Parking brakeParking brake | Spring‑applied, hydraulically released brake | |
| Tire specificationsTire size | 440/80–24 | |
| Working pump displacementWorking pump displacement | Variable piston pump 63 cc/rev | |
|---|---|---|
| Service pump working pressureImplement pump operating pressure | 265 bar | |
| Travel pump displacement (service pump)Travel pump displacement | Variable piston pump 75 cc/rev | |
| Travel system working pressureTravel system operating pressure | 400 bar | |
| Travel motorTravel motor | Variable motor | |
| Travel motor displacementTravel motor displacement | 110 cc/rev | |
| Steering distributor modelSteering unit model | BZZ–250 | |
| Steering modeSteering mode | Front-wheel steering; four-wheel steering; crab steering | |
02 / PRODUCT DETAILS
From operating use to key components, learn about the equipment with images and parameters.
Request a quote for this model ↗You can begin selecting a telehandler by comparing site photos, power and working-parameter requirements. This page describes model features; when you purchase, confirm the target configuration, factory documentation and delivery requirements.
Parameters on this page come from YUYAN 2026 product literature; images show prototype illustrations and color or some configurations may vary. Options such as the engine will be confirmed by the configuration list and written quotation.
MODEL NOTES
The WM4018Y is a new YUYAN telescopic handler with rated load 4,000 kg, maximum lift height 17.5 m, maximum reach 13 m and operating mass 13,000 kg. The following four points help you confirm whether it fits your site and what to specify when asking for a quotation.
The WM3007Y and WM3007J have a rated load of 3,000 kg and, with a 1.6 m³ bucket, a maximum dump height of about 6.1 m: they are aimed at loading, hauling and low stacking. The WM4018Y lifts more weight and higher, suited to lifting material to building floors, high-level warehouse work and feeding material forward over obstacles.
The 4,000 kg figure is the rated value with the boom retracted and low. The farther the boom extends and the higher it raises, the lower the allowable load. Request the load chart and verify how much you can lift at the heights and reaches you normally use. High-level work requires lowering the hydraulic outriggers; when fully deployed they span 3,800 mm, so leave enough working width on site.
Two engine options are shown: Cummins QSF3.8 (China III) and Perkins 904J-E36TA (Euro V). The Euro V version requires low-sulfur diesel and suits markets with strict emissions rules; where emissions requirements are less strict and fuel quality is average, the China III version is easier to maintain. Steering has three modes—front-wheel, four-wheel and crab—for confined sites.
Overall width 2,420 mm and height 2,815 mm, larger than a 40' High Cube door (about 2.34 m wide and 2.58 m high), so it normally ships on flat rack or ro-ro. When requesting a quote, tell us the destination port and we will propose a transport method and cost according to the route.
03 / MATCH & VERIFY
After you enquire about a specific machine, verify the documents and delivery conditions in the following order.
Check the intended use, tonnage/load capacity, attachments and destination-country requirements; the model spec sheet does not replace a specific configuration list.
Request photos, the nameplate or factory documents for the specific machine/batch, and information on actual supply and delivery times.
Specify currency, validity, trade terms, named place and costs included.