Reference new model
YUYAN / Telehandler
New machinery / REPRESENTATIVE MODELS
Discover representative telehandler models, equipment photos and reference technical data. Models marked “Manufactured in Hefei by YUYAN” are produced by Hefei YUYAN; other models are supplied directly by YUYAN. Tell us your budget and destination port so we can match the right equipment solution for you.

NEW / MODEL SELECTION
Tell us your target configuration, working conditions, budget and destination; we will suggest suitable options. Configuration, supply terms and timing are set out in the written quotation.
Photos and specifications can be used to compare models; the final equipment, configuration and quotation are confirmed item by item after you contact us.
Reference new model
YUYAN / Telehandler
Reference new model
YUYAN / Telehandler
Reference new model
YUYAN / Telehandler
BEFORE YOU BUY / BUYING GUIDE
Rated load alone is not enough to select a telehandler: where the load must be placed, how far it must reach and which attachment you use all change suitability; engine, drivetrain and attachment combinations also affect the quote. This page separates handling, dumping and high-lift parameters for its models to help contractors, rental companies and farm buyers define work limits before requesting a quote.
| Model | Rated load | Height and definition | Operating weight | Price |
|---|---|---|---|---|
| YUYAN WM3007J Telehandler | 3000 kg | Unload 6065±50 mm (41°) | 8580 kg | Request quote |
| YUYAN WM3007Y Telehandler | 3000 kg | Unload 6085±50 mm (35°) | 8300 kg | Request quote |
| YUYAN WM4018Y Telehandler | 4000 kg | Lift 17500±50 mm | 13000 kg | Request quote |
The table entries YUYAN WM3007J, YUYAN WM3007Y and YUYAN WM4018Y are new machines manufactured by Hefei Yuyan Construction Machinery Co., Ltd. and supplied directly by YUYAN; the data are taken from the spec sheets for these models on this site. Unload height includes a bucket discharge-angle condition, while lift height is a different measure—do not compare them as the same height.
The WM4018Y has a rated capacity of 4000 kg, a maximum lift height of 17500±50 mm and a maximum forward reach of 13000±50 mm; these are not simultaneously achievable working capabilities. If you must deliver a pallet to a floor or clear an obstacle, request the load chart for the chosen attachment and confirm the allowed load by center of gravity, target height, reach position and stabilizer condition.
The WM3007J and WM3007Y both list a 1.6 m³ rated bucket capacity, but their unload distances are 595.7±50 mm and 1133±50 mm, respectively. For loose materials on a farm or municipal truck loading, provide the truck bed edge, drop point and material, then verify the unload posture and bucket capacity are suitable. Do not treat unload distance as maximum fork reach, and do not substitute bucket volume for allowed load.
WM3007J spec shows synchronized electro-hydraulic gear change; WM3007Y and WM4018Y show hydrostatic transmission. For frequent approaches to pallets and steering in narrow aisles, confirm the actual drive type and control arrangement of the quoted configuration. For forks, bucket or attachments, check the quick‑coupler lock and hydraulic connections; for maintenance, include boom slider lubrication, pin lubrication, hose inspection, filter part numbers and the operation and spare‑parts manuals.
WM3007Y length without forks or bucket is 4800±50 mm, cabin roof height is 2540±20 mm; WM4018Y width with hydraulic outriggers fully deployed is 3800±50 mm. Use the first to make an initial check of access and loading space and the second to review the working support area. For transport, confirm the actual length, width and height, the shipping weight and the packaging of implements before deciding container loading or another shipping method.
You cannot infer that from the web specs. 4000 kg is the rated load and 13000±50 mm is the maximum forward reach; the allowable load at each position must be checked on the load chart for the specific configuration and attachment, and operations must follow the manual’s requirements for stabilizers and ground conditions. Maximum lift height and maximum forward reach do not necessarily correspond to the same boom posture.
Both have a rated load of 3000 kg, but their operating weights are 8580 kg and 8300 kg, respectively, and they differ in transmission and overall length. If you work frequently inside sheds, loading trucks, or turning in tight yards, choose based on space and the unloading position and confirm the proposed configuration with YUYAN. Similar height alone does not make them interchangeable.
Mention of multiple attachments in the model features does not mean all are supplied with every machine. List attachments, hydraulic connections and intended use in the quotation request to confirm. Configuration, quantities and supply arrangements are governed by the written offer. If the machine will lift people, also confirm platform compatibility, operating instructions and local requirements—do not operate as if lifting material only.
First confirm the destination port, Incoterm and unloading conditions; then verify actual shipping dimensions and weight, which attachments will be removed, and the lashing plan. Do not assume operating weight equals transport weight with packaging. YUYAN can assist with documents, customs clearance and local import requirements; the specific documents and applicable requirements must be confirmed with your local customs broker.
NEXT STEP / Next step
Provide the project conditions, tonnage, budget and destination port; we will recommend a suitable configuration. Supply terms and timing are set out in the written quotation.
Inquire about this equipment ↗View verification methods ↗