Reference new model
YUYAN / Compact tractors
New machinery / REPRESENTATIVE MODELS
See representative compact tractor models, equipment photos and reference technical data. Tell us your budget and destination port so we can match the right equipment solution for you. This category covers 50–60 HP 4WD models.

NEW / MODEL SELECTION
Tell us your target configuration, working conditions, budget and destination; we will suggest suitable options. Configuration, supply terms and timing are set out in the written quotation.
Photos and specifications can be used to compare models; the final equipment, configuration and quotation are confirmed item by item after you contact us.
Reference new model
YUYAN / Compact tractors
Reference new model
YUYAN / Compact tractors
Reference new model
YUYAN / Compact tractors
BEFORE YOU BUY / BUYING GUIDE
For orchard aisles, small plots and daily farm handling, compare tractor dimensions with the implements you use rather than only looking at the power rating. The TK504, TK504A and TK604 differ in track width, drawbar pull and PTO; the following comparison helps you clarify access, attachments and the scope of the quote.
| Model | Overall dimensions (L × W × H) | Minimum operating mass | PTO speed | Price |
|---|---|---|---|---|
| YUYAN TK504 50 HP 4WD Farm Tractor | 3450 × 1500 × 2500 mm | 1690 kg | 540/720 r/min | Request quote |
| YUYAN TK504A 50 HP 4WD Compact Tractor | 3250 × 1400 × 2050 mm | 1420 kg | 720 r/min | Request quote |
| YUYAN TK604 60 HP 4WD Farm Tractor | 3450 × 1500 × 2500 mm | 1690 kg | 540/720 r/min | Request quote |
Dimensions, minimum operating mass and PTO speeds come from the spec sheets for these models; the table does not include implements or loading equipment. These are new YUYAN-brand machines, supplied directly by YUYAN; actual accessories and transport configuration must be detailed separately.
The TK504A measures 3250 × 1400 × 2050 mm; the TK504 and TK604 measure 3450 × 1500 × 2500 mm. Match shed eaves, orchard row clearances and warehouse door height against the tractor plus implement envelope. Adjustable track width does not mean the overall machine width can be changed at will, and turning space cannot be inferred from wheelbase alone.
The TK504 and TK504A both list 36.8 kW (50 hp), but the former has PTO 540/720 r/min while the latter is 720 r/min. If you already have a rotavator or mower, check its nameplate, spline and driveshaft length. Don’t assume implement compatibility just because both are compact 4WD—missing speeds cannot be compensated by changing how you operate.
The TK604 is 44.2 kW (60 hp) with maximum drawbar pull 13400 N; the TK504A is 10400 N. Drawbar pull is not the allowable trailer payload—verify hitch, brakes and ground conditions. The TK604 can accept a front loader or rear backhoe, but the loader shown is illustrative; quotations must state whether such attachments are included and specify their capacities.
All models in this category use an 8+2 gearbox; TK504’s spec sheet also lists an optional 8+8 shuttle shift. For loading or frequent reversing, confirm which transmission you need. TK504A offers optional hydraulic output circuits—verify compatibility with your implement couplings. For routine maintenance, monitor the air filter, lubricants, clutch adjustment and front-axle lubrication, and request the matching manual and consumable part numbers.
If the bottleneck is a low entrance or narrow passage, compact dimensions deserve priority. If the bottleneck is implement compatibility, PTO and hydraulic connections may be more important. First filter by your actual routes and implement requirements—being smaller does not make it the best choice for every small farm.
Photos do not define what is included. The front loader is an example work attachment. Request that the attachment, mounting brackets, hydraulic connections and applicable capacities be listed in the configuration details. Configuration, quantities and supply terms are final only in the agreed written quotation.
The table shows machine dimensions, not packaging sizes. Confirm tyres, cab, additional equipment and whether implements will ship separately; then calculate packed length, width, height, mass and lashing points. Also verify unloading equipment at the destination port and access to the farm.
Provide your local customs broker with the engine identification, emissions data and the planned configuration to confirm applicable import requirements. YUYAN can assist with documents, customs formalities and local import requirements; which documents are needed and their suitability must be confirmed by your local customs broker.
NEXT STEP / Next step
Provide the project conditions, tonnage, budget and destination port; we will recommend a suitable configuration. Supply terms and timing are set out in the written quotation.
Inquire about this equipment ↗View verification methods ↗