Hefei, China / Serving the Latin American market

hfyuyan@yuyanmachinery.com

New machinery / REPRESENTATIVE MODELS

New skid steer loaders Representative models

See representative skid steer loader models, equipment photos and reference technical data. YUYAN models marked “Manufactured in Hefei by YUYAN” are produced by Hefei Yuyan; other models are supplied directly by YUYAN. Tell us your budget and destination port so we can match the right equipment proposal for you.

YUYAN WM312 skid steer loader — equipment photos
04 representative modelsSelect a model · See more photos and specifications

NEW / MODEL SELECTION

Get to know the equipment models,
match your procurement plan.

Tell us your target configuration, working conditions, budget and destination; we will suggest suitable options. Configuration, supply terms and timing are set out in the written quotation.

Photos and specifications can be used to compare models; the final equipment, configuration and quotation are confirmed item by item after you contact us.

BEFORE YOU BUY / BUYING GUIDE

When comparing new skid steer loaders,
match load, access and attachments.

You should not choose a new skid steer loader by engine power or bucket size alone: the weight to be moved, site access width, dump location and attachments’ hydraulic needs all determine the right model. Quotes vary with engine, controls, attachments and cab; this section helps you translate site requirements into verifiable parameters to prepare your inquiry to YUYAN.

Price on request by configuration, quantity and destination port (no public price; click to inquire)
ModelRated load / operating loadWorking width / bucket widthDumping heightPrice
YUYAN WM312 Skid Steer Loader 1200 kg1850 mm2500 mm Request quote
YUYAN BM525X Compact Track Loader 224 kg(35%)1260 mm1270 mm Request quote
YUYAN BM50 Skid Steer Loader 870 kg1800 mm2551 mm Request quote
YUYAN WM308 Skid Steer Loader 850 kg1830 mm2350 mm Request quote

The YUYAN WM312 and YUYAN WM308 are manufactured by YUYAN in Hefei; the YUYAN BM525X and YUYAN BM50 are new YUYAN-brand machines supplied directly by YUYAN. Data are taken from the product spec sheets in this category: the original designation of rated load or rated operating load is kept, and width is shown as the working width or bucket width listed on each page.

Choose the skid-steer for the specific job

  1. Material matters more than apparent bucket size

    The YUYAN WM312 has a rated load of 1200 kg and a bucket capacity of 0.54 m³; the YUYAN WM308 has 850 kg and 0.48 m³ respectively. The same volume of sand, wet soil or farm bulk material can weigh differently. For pallet work, also check the load center, the weight of the forks and the allowed capacity of the chosen attachment: the bucket-rated value should not be assumed to equal fork capacity.

  2. Measure the entry, then the receiving vehicle

    The YUYAN BM525X tracked skid-steer has a working width of 1260 mm and is a primary candidate for landscaping and narrow access; its dumping height is 1270 mm, so confirm the receiving location. The YUYAN BM50 wheeled skid-steer has a dumping height of 2551 mm and should be evaluated separately for loading tasks. On soft ground, check the tracks and ground bearing capacity; on hard pavement, consider tires and turning wear. That the machine can pass through an opening does not guarantee enough space to raise the arms and rotate.

  3. Indicated hydraulic flow does not guarantee attachment compatibility

    Catalog hydraulic flows for WM312, WM308 and BM50 are 80 L/min, 64 L/min and 66.2 L/min respectively. For a sweeper, auger or breaker, verify the accessory’s required auxiliary‑circuit flow, pressure, return method and quick‑coupler type; do not assume the machine’s total flow equals available flow for the attachment. The high‑flow system for WM308 is optional and must be specified separately in the quoted configuration.

  4. Consider maintenance resources when choosing configuration

    WM312 is listed with a Yanmar III 4TNV98T-ZCNLYS engine and BM50 with a Xinchai 490. Confirm filter, belt and seal part numbers against the final engine nameplate. Rental companies should in particular confirm controls, maintenance access and the operator manual, and prepare a wear‑parts list for tires or tracks. Daily checks should include radiator dust build‑up, fluid condition and hydraulic‑fitting leaks.

Information to include with your inquiry

  • Primary tasks, material type and weight per load; if using forks, add pallet dimensions, load center position and attachment weight
  • Photos and measurements of clear width and clear height at site entrances and aisles, ground condition and slope photos; sideboard height of the receiving vehicle and dimensions of the loading position
  • Photos, connection dimensions and technical data for intended attachments, specifying required hydraulic flow, pressure, return and whether electrical control connection is needed
  • Desired model and quantity, engine and control requirements; request from YUYAN the configuration list for cab, air conditioning, bucket, quick‑coupler and hydraulic options
  • Nameplate photos of the unit and engine, photos of the controls, and videos of travel, boom lift and attachment operation; also request the operator manual and wear‑part reference numbers
  • Destination port and local delivery conditions; request the quotation to state packing dimensions, transport weight, whether attachments are packed separately, the Incoterm and which costs are included or excluded

Frequently Asked Questions

Can I use the BM525X tipping load as the operating load?

No. The spec lists a tipping load of 640 kg and a rated working load of 224 kg (35%); the tipping load is not the daily working limit. When comparing models, keep each parameter’s definition and verify the load capacity for the fitted attachment and the load’s center of gravity.

Are the machine dimensions sufficient to arrange the container?

Not by themselves. The BM50 page gives reference packing dimensions of 2580×1800×2200 mm and an operating mass with standard bucket of 2950 kg, but packing condition differs from working condition. Confirm bucket removal, tie points and separate packing of accessories, then determine the container plan from the final packed dimensions and transport mass.

Do I still need to check photos and configuration if the machine is new?

Yes. The model page is for selection and does not replace the contractual configuration. Check the unit nameplate, engine, control type and accessory operation videos; include hydraulic options and supplied spare parts in the configuration list. Configuration, quantity and supply terms are confirmed in the written quotation.

When should you confirm the skid-steer import documents?

After you finalise the engine and attachment configuration, and before placing the order, provide the technical data to your local customs broker for verification. For the chosen skid-steer arrangement, YUYAN can assist with documentation, customs formalities and local import requirements; specific requirements must be confirmed by your customs broker. Calculate destination import costs separately from the equipment quotation.

NEXT STEP / Next step

Need a specific configuration?

Provide the project conditions, tonnage, budget and destination port; we will recommend a suitable configuration. Supply terms and timing are set out in the written quotation.

Inquire about this equipment ↗View verification methods ↗
Inquire about equipment↗