Hefei, China / Serving the Latin American market

hfyuyan@yuyanmachinery.com

Used equipment / REPRESENTATIVE MODELS

Used cranes Representative models

See representative crane models, equipment photos and reference technical data. Tell us your budget and destination port so we can propose suitable equipment.

Equipment photo: XCMG 100-ton mobile crane
05 representative modelsSelect a model · See more photos and specifications

USED / MODEL SELECTION

Get to know the equipment models,
match your procurement plan.

Tell us the expected year, operating conditions and budget; we will match specific machines and provide corresponding photos and inspection documents.

Photos and specifications can be used to compare models; the final equipment, configuration and quotation are confirmed item by item after you contact us.

BEFORE YOU BUY / BUYING GUIDE

To choose between used cranes,
evaluate the load at the actual working radius.

To choose a used crane, first define the load, the working radius and the space for the stabilizers; price also depends on the unit year, lifting hours, chassis condition and the counterweight and jib configuration. This section separates the truck crane from the mobile crane so you can compare models by lifting task and prepare the information needed to verify the identity and performance of the unit offered.

Reference FOB price (Not a final quotation; ask for the current price.)
ModelCapacity indicated on the spec sheetMain boom lengthTransverse stabilizer spanReference FOB price
XCMG 100-Ton Truck Crane Maximum 100,000 kg12 – 52 m (depending on model)7.6 – 8.0 m US$120,000
SANY STC750 75-Ton Truck Crane Rated 75 tNot specified; request the unit spec sheetNot specified; request the unit spec sheet US$90,000
SINOTRUK HOWO 6×4 14-Ton Truck-Mounted Crane Rated 14 tStraight boom; length to be confirmedNot specified; request the unit spec sheet US$32,800
XCMG QY70KC 70-Ton Truck Crane Rated 70 t48 m (main boom fully extended)7.9 m US$70,000
XCMG 80-Ton Truck Crane Maximum 80,000 kg11 – 47 m (depending on configuration)7.0 – 7.6 m (typical value) US$73,000

All models in the table are representative used machines of other brands, supplied directly by YUYAN; lifting capacities, boom lengths and outrigger dimensions are taken from this category’s product data. Items not shown must be confirmed with the unit’s documentation and must not be assumed. Website photos and specifications are for model comparison only; the specific machine’s year, operating hours and condition will be confirmed with that unit’s photos, running video and written quotation after you request the match.

Compare the lifting task with each unit’s conditions

  1. Distinguish dedicated lifting from combined transport and lift

    The SANY STC750 75 t truck crane can be included in comparisons for construction and industrial lifting, but the data do not list the boom length: obtain the unit’s load chart. The SINOTRUK HOWO 6×4 truck-mounted crane 14 t is intended for tasks combining lifting and material transport. The crane’s rated capacity is not equal to the platform’s allowable payload; when requesting a quote, confirm platform capacity, vehicle gross/load limits and the crane’s condition separately.

  2. Match the load to the radius and the outrigger footprint

    The XCMG QY70KC 70 t truck crane datasheet lists a fully extended main boom of 48 m and a transverse outrigger span of 7.9 m. Provide the lift radius, required lift height and site bearing capacity to your lifting personnel so they can verify the unit’s load chart. On the XCMG 100 t truck crane the boom length range 12 – 52 m covers different models; do not apply the maximum reach and the maximum lifting capacity as if they both apply to the same configuration.

  3. Verify chassis mileage and lifting wear separately

    Used truck cranes accumulate wear from both road travel and lifting operations. Cross-check chassis mileage and recorded lifting hours against swing backlash, telescopic boom sliders, wire rope and outrigger cylinder condition. Request close-up photos of boom welds, chassis and outrigger saddles to check for cracks or repair marks. Cold starts and functional tests should be carried out by qualified personnel; observe extension, swing, winches and hydraulic leaks.

  4. Calculate transport using the shipping dimensions and weight

    QY70KC reference overall dimensions: 14,700 × 2,790 × 3,820 mm; travel configuration mass: 44,800 kg. Do not plan transport using lifting tonnage alone; verify the actual unit’s dimensions and mass, whether counterweights and jib can be removed and how they will be secured, then compare Ro-Ro or other suitable sea transport options and confirm lifting, lashing and receiving conditions with the carrier.

Lifting and verification information to include with your inquiry

  • Weight of the load and rigging, sketch of lift and set-down points, actual working radius and required height.
  • Plan of the area for outrigger deployment, ground bearing capacity data and proposed outrigger pads; access to the site and route conditions between work fronts.
  • Photos of the specific unit’s nameplate or PIN, engine and lifting equipment serial numbers; vehicle identity and equipment ownership documents.
  • Proof of year, horometer and chassis odometer readings, maintenance and repair history; note whether instruments were replaced or the boom repaired.
  • Current videos of cold start, outrigger extension/retraction, boom extension and elevation, slewing and winches; inspection records for the moment limiter and alarm functions.
  • Clear close-up photos of boom welds, outrigger mounts, slewing bearing, wire rope, sheaves, hook safety latch, cylinders and hoses.
  • Load chart for the specific unit, list of counterweights and jib, measured dimensions and mass in transport configuration, budget and destination port.

Frequently Asked Questions

Will a higher-tonnage crane always replace the one you currently use?

Tonnage alone is not enough. The XCMG 80T mobile crane lists boom length 11 – 47 m, reflecting different configurations; whether it can do the intended job depends on that unit’s load chart, working radius, counterweights, jib and outrigger deployment. The maximum lifting capacity does not apply across the whole working range.

What should you confirm about maintenance and spare parts?

Request operation and parts documentation that matches the machine serial number. Verify part numbers and maintenance records for the wire rope, blocks, seals, filters and load moment limiter. Also confirm chassis brakes and tires. Check with your local workshop about parts channels and repair capability, and include required replacements in your budget.

Can I use the reference FOB price as the total project budget?

Separate the crane purchase price from the costs to get it to site. The reference FOB price on this page is not a final quotation; the unit price is confirmed by written offer. Calculate sea freight, insurance, destination charges, import duties and inland transport separately, and verify whether costs for removing/installing counterweights or jib and separate packaging are included.

How are documents and inspection coordinated before shipping to Latin America?

Your local customs broker should first confirm the documents, customs clearance and local import requirements for a used crane. YUYAN can assist with these matters, but the broker’s confirmation is authoritative. Once a unit is selected, you can arrange an on-site or third‑party inspection; timing and fees are confirmed separately, and the written quotation should identify the machine.

NEXT STEP / Next step

Would you like to confirm a specific machine?

Provide the target model, year, budget and destination port; after matching we will provide photos, operating data and a quotation for the matched unit.

Inquire about this equipment ↗View verification methods ↗
Inquire about equipment↗