Reference new model
YUYAN / Walk-behind and trench roller
New machinery / REPRESENTATIVE MODELS
View representative walk-behind and trench roller models, equipment photos and reference technical data. Tell us your budget and destination port so we can propose the appropriate equipment solution.

NEW / MODEL SELECTION
Tell us your target configuration, working conditions, budget and destination; we will suggest suitable options. Configuration, supply terms and timing are set out in the written quotation.
Photos and specifications can be used to compare models; the final equipment, configuration and quotation are confirmed item by item after you contact us.
Reference new model
YUYAN / Walk-behind and trench roller
Reference new model
YUYAN / Walk-behind and trench roller
Reference new model
YUYAN / Walk-behind and trench roller
Reference new model
YUYAN / Walk-behind and trench roller
Reference new model
YUYAN / Walk-behind and trench roller
Reference new model
YUYAN / Walk-behind and trench roller
BEFORE YOU BUY / BUYING GUIDE
On small areas and in trenches the challenge is usually accessing, turning and operating safely—not choosing a heavier machine. Walk-behind and trench rollers differ significantly in weight, width, vibration and power options. This page helps you filter by site constraints, then clarifies configuration and packaging before you request a quotation.
| Model | Operating weight | Steel drum / working width | Vibration force | Price |
|---|---|---|---|---|
| YUYAN BM30 Walk-Behind Single Drum Vibratory Roller | 330 kg | Drum 600 mm | 15 kN | Request quote |
| YUYAN BM50 Walk-Behind Double Drum Vibratory Roller | 540 / 570 kg | Drum 600 mm | 20 kN | Request quote |
| YUYAN BM60 Walk-Behind Double Drum Vibratory Roller | 788 – 800 kg | Steel drum 620 mm | 20 kN | Request quote |
| YUYAN BM700 Walk-Behind Single Drum Vibratory Roller | 550 kg | Steel drum 700 mm | 20 kN | Request quote |
| YUYAN BM80 Walk-Behind Double Drum Vibratory Roller | 788 – 800 kg | Steel drum 680 mm | 20 kN | Request quote |
| YUYAN BMRC18 Trench Roller | Narrow version 1660 kg | Working width: narrow 560 mm / wide 820 mm | Low amplitude 15*2 / High amplitude 30*2 kN | Request quote |
This page shows new YUYAN-brand walk-behind and trench equipment supplied directly by YUYAN, using the site product cards and full spec sheets. Ranges or slashes indicate different power, model or vibration options; for BMRC18 the weight column uses only the value explicitly marked as the narrow version.
The BM60 has a drum width of 620 mm and an overall machine width of 680 mm; the BM80 has a drum width of 680 mm and an overall machine width of 730 mm. When measuring a trench entrance or a sidewalk, judge passability by the overall machine width and consider handle steering and operator position. That the drum barely fits does not mean safe operation is possible. Photos are needed to assess tight turns, curb drops and obstacles.
The BM30 weighs 330 kg with centrifugal force 15 kN; the BM700 weighs 550 kg with 20 kN. Both list frequency 70 Hz and amplitude 0.6 mm. For small-area repairs, compare coverage, material and handling conditions rather than deciding by weight alone. The more restricted the working face, the more important it is to confirm operator retreat routes when the machine moves forward, reverses or stops.
The BMRC18 has a narrow working width of 560 mm and a wide version of 820 mm; frequency 42 Hz; low and high amplitudes 0.7 mm and 1.4 mm. Its operating conditions are not the same as a standard walk-behind. Describe trench wall support, pipeline locations and backfill materials; confirm the width version and control method quoted. That the narrow version can pass does not authorize working at every point in the trench.
The BM50 lists gasoline, air-cooled diesel and evaporative water-cooled diesel options. Confirm starting method and maintenance for the chosen configuration. For a walk-behind, check handlebar adjustment, drivetrain, antivibration elements and water spray maintenance. Packed dimensions may vary with handlebar position and power unit: request the packing drawing, weight and securing instructions for that configuration before deciding sea loading and local unloading methods.
Both cards show 788 – 800 kg, but the drums are 620 mm and 680 mm, respectively, and the machine pass-through conditions differ. First verify that the narrow area can accommodate the machine and the operator, then compare coverage. The power option and individual parameters will be confirmed with the final configuration.
Do not interpret it that way. It has narrow and wide working versions and low and high amplitudes; suitability must be judged with the trench conditions. Please provide trench wall, pipeline and backfill plans, and ask about specific control and operator requirements; the catalog name does not replace on-site safety and construction assessment.
Not enough. The handle position, power configuration, and packaging type will change the transport plan. For the BM30, the spec shows wood-crate outside dimensions of 113×84×124 cm; we still need to verify the actual packed weight and dimensions of the equipment being quoted. Please confirm configuration, quantity, and supply arrangements item by item in the written quotation.
NEXT STEP / Next step
Provide the project conditions, tonnage, budget and destination port; we will recommend a suitable configuration. Supply terms and timing are set out in the written quotation.
Inquire about this equipment ↗View verification methods ↗