Hefei, China / Serving the Latin American market

hfyuyan@yuyanmachinery.com

New machinery / REPRESENTATIVE MODELS

New hydraulic power units and pumps Representative models

See representative models, equipment photos and reference technical data for hydraulic power units and pumps. Tell us your budget and destination port so we can match the right equipment solution.

YUYAN STP13-30 / STP18-40 manual push-type hydraulic power unit — equipment photo
03 models representativeSelect a model · See more photos and specifications

NEW / MODEL SELECTION

Get to know the equipment models,
match your procurement plan.

Tell us your target configuration, working conditions, budget and destination; we will suggest suitable options. Configuration, supply terms and timing are set out in the written quotation.

Photos and specifications can be used to compare models; the final equipment, configuration and quotation are confirmed item by item after you contact us.

BEFORE YOU BUY / BUYING GUIDE

When choosing new hydraulic power units and pumps,
distinguish hydraulic oil flow from water flow.

The power unit selection depends on the oil flow, pressure and engine configuration required by your tool; if you will connect a slurry pump, also assess the water flow, total head and any debris in the water. Quotation varies with the combination and quantity of power unit, pump, hoses and couplers. This section helps you translate your working conditions into compatible technical requirements instead of requesting quotes only by model size.

Price on request by configuration, quantity and destination port (no public price; click to inquire)
ModelHydraulic flowPressureWeightPrice
YUYAN STP13-30 / STP18-40 Portable Hydraulic Power Unit 20–30 / 30–40 L/minMaximum pressure 155 bar80 / 118 kg Request quote
YUYAN STP30-60 Portable Hydraulic Power Unit 2*20/2*30/1*60 L/minMaximum pressure 155 bar168 kg Request quote
YUYAN STP60 / STP80 Hydraulic Slurry Pump 26–34 / 30–40 L/minWorking pressure 105–139 bar11 / 30 kg Request quote

All items in the table are new YUYAN-brand equipment, supplied directly by YUYAN; values come from the spec sheets for this product category and the paired values correspond, respectively, to STP13-30 / STP18-40 and STP60 / STP80. For power units the table lists maximum oil supply flow and maximum pressure; for slurry pumps it shows the required hydraulic flow range and working pressure—these pressures are not the same criterion and must not be treated interchangeably.

What to evaluate in the hydraulic circuit and drainage

  1. Choose the power unit by the tool’s required flow

    STP13-30’s maximum supply flow is 20–30 L/min, STP18-40 is 30–40 L/min. Check the tool nameplate and manual to confirm allowed flow, working pressure and return requirements. STP30-60 is marked 2*20/2*30/1*60 L/min; if you need multiple outputs, confirm the corresponding output mode and simultaneous operating conditions — do not add the flows of different modes together.

  2. Compare discharge flow and lift height together

    STP60 indicates a discharge flow of 100 m³/h and a maximum head of 25 m; STP80 is 200 m³/h and 16 m, respectively. For municipal flooding, trenches or farm drainage, specify the lift height, discharge route and presence of sand or mud; do not choose only by the largest flow. The spec sheet does not include a complete performance curve: when requesting a quote, confirm the flow under your actual working conditions and do not assume the listed flow and maximum head are achieved simultaneously.

  3. Verify the engine version and consumables together

    STP13-30 is fitted with a Honda GX390 gasoline engine; STP13-30C lists a Changchai 186F diesel engine. Do not prepare the same fuel or maintenance supplies for both versions. For rental turnover or remote sites, verify local fuel availability and filter and seal specifications. Keep couplings clean before connecting, and check hydraulic oil, hoses and leaks according to the manual of the quoted version.

  4. Manual mobility does not replace transport planning

    STP30-60 weighs 168 kg: plan loading and unloading methods suitable for that weight, rather than judging loadability by wheels alone. Unit documentation records different packaging dimensions; before booking transport, obtain the exterior packaging dimensions, gross weight and packaging photos for the quoted configuration. With that information decide LCL or full-container loading and the securing method. Also clarify whether the pump and hoses are packed separately and how fluids will be managed.

Information to prepare for a hydraulic package inquiry

  • The full model and nameplate photos of the tool or pump you intend to drive, and the hydraulic flow, pressure and return requirements from its manual.
  • Single-tool operation or simultaneous multi-circuit use, function of each circuit and required supply mode
  • Drainage site photos, elevation lift, discharge pipe length and route, and description of sand, silt, debris and blockage risks
  • Close-up photos of existing hydraulic hoses and fittings, connection dimensions and interface types; specify which accessories should be quoted with the unit
  • Power unit engine and fuel version, typical working environment, and list of required operation manuals, filters and seals
  • Destination port, quantity and on-site unloading conditions; request outer packing dimensions, gross weight, trade term and scope of costs in the quotation

Frequently Asked Questions

Can the STP18-40 connect directly to the STP80?

Both list hydraulic flow as 30–40 L/min, which provides an initial compatibility check, but pressure regulation, return line, hoses and fittings must still be verified. The power unit’s maximum pressure of 155 bar is not the pressure that should be applied to the pump; the STP80 operates at 105–139 bar. Final settings must be confirmed in the matching documentation.

What is the difference between hydraulic flow and water flow?

L/min here denotes the hydraulic oil flow required to drive the tool or pump, while m³/h denotes the water flow the slurry pump delivers — not the unit’s oil supply capacity. Pipe resistance, lift and debris in the water will affect field performance; provide site conditions to verify pump suitability.

Does a slurry pump also require a power unit and hoses?

The slurry pump requires a compatible hydraulic power source; the pump body does not provide drive power on its own. STP60 / STP80 documentation lists 3/8in flat-face quick couplers. If you already have a power unit, verify the couplings and hydraulic circuit requirements; the quotation should state whether the power unit, hydraulic hoses and discharge pipe are included.

How to obtain a clear quotation for the complete package?

Include the power unit version, pump and accessories in your inquiry; configuration, quantity and supply arrangements are confirmed by the written quotation. For this hydraulic package, YUYAN can assist with documents, customs clearance and local import requirements; the required documents must be confirmed with the buyer’s local customs broker.

NEXT STEP / Next step

Need a specific configuration?

Provide the project conditions, tonnage, budget and destination port; we will recommend a suitable configuration. Supply terms and timing are set out in the written quotation.

Inquire about this equipment ↗View verification methods ↗
Inquire about equipment↗